AT: Tenergy 111V 6000mAh Heavy Duty LIPO PCB Protected Battery Pack w/ Bare Leads
11.1V 6000 mAh Polymer Li-Iontechnology madeof3-cell Polymer Li-Ion cell of 3.7V 6350mAhVoltage11.1v (working) 12.6V ( peak)Capacity6000mAhMax. Discharging rate:6.5Amp with PCBOne protective circuit board PCB installed with thebattery packthat limits the discharging current of battery pack to 6 Amp. But protect battery from- Over-charging cut-off; 13V- Over-dischargingcut-off7.2V- Over-drain current limit; 6.5A- Short circuit and Wrong polarityLight-weighted13.4 oz.Dimension170mmx 53mm x 22mm20AWG bare leads and shrink wrappedRecommended charger:Universal Li-ion / Li-polymer Smart Charger to charge this battery pack. CautionImproper use like overcharging and over discharging can cause explosion and/or fire.User of the battery is required tohave the sufficient Li-polymer charging and use experience and technical knowledge. Tenergy or All-Battery.com are not responsible for any damage or injury caused by misuse, misunderstanding or abuse of this product.