WAGO 759-302 PLC software 759-302 1 pc(s)
Simple to handle Windows application for the operation and representation of a knot from the WAGO I/O system 750, without that the knot for it is attached to the field bus system The software selects the configuration from the knot and displays it as graphics on the screen. The diagram can be printed together with a configuration list as documentation. The software makes it possible to display and give the process data of individual bus clamps. Thus the field-sided wiring inclusive all existing sensors and actuators can be tested during start-up. Application-specific adjustments like e.g. the selection of the Baud rate or the kinds of sensor can be made with certain interface, Pt100 and thermocouple clamps For the communication between the software and the knot, the coupler is attached with the communication cable belonging to the range of supply at a free serial port of the PC.