VOLTCRAFT VC-340 Clamp meter Calibrated to (ISO standards) Digital CAT II 600 V CAT III 300 V Display (counts): 6000
The Professional clip-on ammeter in handy design is particularly suitable for measurements on machines. It provides measurement functions, which are often only with large pliers are available. Due to the small size the use on machines with limited space.Automatic AC/DC-current detectionThe measuring device detects whether it is direct or alternating voltage and automatically selects the correct measurement function. If necessary, you can also be selected manually.Switchable low-pass filter (LPF)In the case of digital controlled motors are used for measuring unwanted, aufmodulierte control signals are ignored. During the measurement, only the value of the alternating current below 160 Hz.Start-up current measurement (Inrush)The inrush function captures the starting current in the first 100 ms. The measuring process in this mode of operation, from 5 A/AC is started automatically. The determined starting current remains on the display.Contact-free AC voltage detection With the NCV function automatically detects the pliers contact-less, whether on a power cable available mains voltage. Also makes detecting cable breaks easy.Easy to operate The measurement functions can use a rubberized keypad simply operated with the thumb. Despite the small dimensions can be operated with gloves.Factory calibration ensures accurate readings Calibration according to manufacturer standards is part of Voltcraft Quality Assurance. This ensures high quality products and compliance with tolerance limits as outlined in the user manual. This does not include certification.This text is machine translated.