Thermaltake The Tower 300 Microtower Game console casing Black 2 built-in fans Window
The Tower 300 is a m-ATX housing with classic vertical housing design and comes in an octagonal prism form. It supports up to a 420 mm AIO radiator on the right and can take up to eight 120 mm/140 mm fans. With a separately available Chassis Stand Kit, users can enjoy a unique view with a special horizontal placement.The Legacy ContinuesAs a new edition of the Tower series, The Tower 300 takes over the classic vertical housing design, but comes in an octagonal prism form. It possesses an astonishing hardware compatibility and offers space for a 4090-GPU, a standard power supply with up to 220 mm diameter and a 420-mm AIO-radiator. In addition, it can take up to eight 120mm/140mm fans on the top, the back, the power supply cover and the right fan bracket. If you would like to enhance the look of The Tower 300, you can purchase the 3.9 LCD Display Kit and Chassis Stand Kit, which are available separately. The former is used to display real-time component information, the latter for a unique view through a special horizontal placement.Classic vertical housing designThe Tower 300 retains the iconic contours of its predecessors, with a vertical body design, but in an octagonal prism design that allows the enclosure to have a smaller footprint and provides flexibility and minimal impact on your gaming and working space.Unique vision - horizontal placement of the housingThe Tower 300 can easily be individually adjusted with the optional Chassis Stand Kit, which includes a lower cover plate and a display stand for horizontal installation of the housing.Installation:1. Screw off the original feet on the bottom of the housing2. Install the new housing base cover and carefully place Tower 300 on the standNote: It is recommended to position the radiator higher than the AIO pump.Supports up to a 420 mm radiator on the right sideThe Tower 300 offers an extraordinary cooling, as it supports up to a 420-mm radiator on the right side, which effectively reduces the temperature in the interior of the casing and maintains an optimum system performance.Tool-free panels for easy accessThe Tower 300 has three 3 mm thick hardened glass panels on the front and two perforated discs on each side. All are light and can be removed without using any tool.Two CT140 PC-fans pre-installedThe Tower 300 has two 140-mm PWM-fans on the top side, which provide for a good cooling power.Select the type of installationOn the right side, The Tower 300 can accommodate either three 120/140mm fans or one 420mm/360mm AIO radiator. The installation is very easy thanks to the removable fan bracket, which simplifies the process.Air inlet and outletThe Tower 300 has a vertical chassis design with well-designed cold air inlets and hot air outlets to keep the interior temperature low at all times.We've tested everything so you don't have to do itAt Thermaltake, we always test our products in tough conditions to ensure product quality. The Tower 300 products were tested for 30 minutes at 100% full load, with the best CPU, GPU and motherboard at the time of testing, while we are working with a consumer-style setup to test how the chassis behaves in real-world conditions.Massive air flow & unbelievable powerThe thermal images were taken during the heat test. Thanks to the two pre-installed CT140 PC fans, we were able to ensure The Tower 300 has massive airflow that provides amazing cooling performance and low internal temperature using the highest quality components.Perfect protection against dustThe Tower 300 has well thought-out filters on the top, the back, the inside and the inner floor, in order to protect the system from dust.Excellent hardware support & cooling solutionsThe Tower 300 offers a good hardware support. It can support a CPU cooler with a maximum height of 210 mm, a GPU with a maximum length of 400 mm (without PSU cover), a power supply with a length of up to 220 mm, three 2.5 SSDs or three 3.5 HDDs in total. Two CT140 fans are pre-installed on the top of the chassis to improve thermal efficiency. An additional 120 mm or 140 mm fan can be installed on top of the power supply cover, and up to a 420 mm/360 mm AIO CPU cooler can be installed on the right side of the chassis for maximum cooling.Convenient I/O portsA USB 3.2 (Gen 2) Type C and two USB 3.0 ports are located on the top to provide direct access when required.DMD: Removable modular designNo more unreachable screw corners or gaps, installation can be a breeze with our modular design that can be disassembled.This text is machine translated.