Tenergy 2A Charger for 48V NiMH/NiCD Battery Pack
Specification:The best 48V NiMH/NiCD Battery Intelligent Charger in the market Charger Switches to Trickle status automatically when any of the following criteria is reached:(The strongest protection for your battery)Minus V Value > 3~5 mV/cellOr Maximum Cell Voltage > 1.56V/cell(NI-MH)1.7V/cellNI-CDOr Max. Cell Temp.>55Or Max. Cell Temp. exotherm >18Or Safety Timer=18hoursCompatible with 48V NiMH/NiCD Battery from 1.6AH to 30AH Charge current2A 0.2A Reversal polarity and Short-Circuit Protection ThermistorNTC type, 10K and =3950 Input voltage90~264VAC 50/60Hz DimensionsL/W/H, 148mm/78mm/43mm Power Indication & LED IndicationsPower ON -- Red FlashingCharging -- RedFully Charged -- GreenErrors Red Flashing Accessories Included Water Proof 3 Pin kirksite Connector (male and female) Tamiya Female connector.Alligator clips red + black.NTC themistor cable. Caution The charger is designed for indoor use only. Don't leave the charger unattended during charging.The Charger should be positioned horizontally and work in well ventilated condition, avoid water and keep away from flammable explosive goods.Don't cover the charger when charging, ambient temperature shall not be more than 40oCDon't touch the plug.Don't leave the batteries and chargers on wood surface or carpet.Cut off the power supply before connect or disconnect the charger with batteries.Don't try to disassemble the charger, High voltage inside, danger!Download product Datasheet HERE.