RAISE3D PMRA-1008-002 P- 721 Filament PP 175 mm 600 g Ecru 1 pc(s)
The polypropylene-based P-Filament 721 offers excellent 3D printing performance with low deformation and shrinkage in combination with an extremely high layer adhesion. Printed parts made of P-filament 721 are very break-proof, have excellent mechanical properties, excellent chemical resistance, good temperature stability and low friction. Due to its low density, it is excellently suited for light construction. Applications range from technical components to individual decoration and art objects to toys. The food integrity of the PP starting material used opens up additional possibilities.Pre-treatment: It is recommended to dry the material in a PrintDry at 60-70°C for up to 24 hours before printing 3D to achieve better coating adhesion and low distortion.Recommended printing parameters: Bed adhesion: Magigoo PP on BuildTak surface or P surface 141 as the printing surface can be used on machines from other manufacturers. Preheat: Heat the bed at 90°C for 15-20 minutes before the pressure. It is recommended to print with the top cover attached.Extruder temperature: 200 - 220 °C temperature of the hot bed surface: 50 - 70 °C Chamber temperature: Recommended: 65 - 80 °C.This text is machine translated.