Murrelektronik 7000-40501-3351200 Sensor/actuator connector (pre-fab) 1200 m 1 pc(s)

Additional technical information: Design: 40501Number of wires/cross-section: 4× 0.34 mm²Wire insulation: PP (br, ws, bl, sw)Bend radius (moving): 10× Outer ØTemperature range (moving): -20...+80 °CCable identification: 335Cable weight [g/m]: 56.10Material (conductor): CU-strand, blankResistance (conductor): Max. 52 Ω/km (20 °CØ C) WireinsulationØ: ±1.5 mm (core insulation: 1 mm): 1 mm (core insulation: 1 mm (core insulation: 1 mm): 1 mm (core insulation: 1 mm (core insulation: 1 mm): 1 mm (core insulation: 1 mm (core insulation: 1 mm: 1 mm (conductor): 1 mm br, sw, bl, wsVerslilverbund: 4 wires strandedShielding: YesChemical resistance: Good oil, petrol and chemical resistance (VDE 0472 Part 803 Test B)Thermal resistance: Flame resistant according to UL VW1, CSA FT1Test voltage: 2000 V ACbending radius (fixed): 10× Outer-ØLocking of the slots: Screw thread (M12×1 mm) recommended tightening torque 0.6 Nm, self-lockingmaterial (locking): Die-cast zinc, matt nickel-plated; Cable colour: Grey; Cable diameter: 5.9 mm; Cable length: 12.00 m; Connection side A (sensors/actuators): M12 plug, straight; Connection side B (sensors/actuators): M12 socket, straight; Cross-section (sensor/actuator wiring): 0.34 mm²; IP rating: IP65 (mounted), IP67 (mounted); Jacket material: PUR; Max. temperature: +80 °C; Min. temperature: -40 °C; Nominal current: 4 A; Nominal voltage: 300 V AC; Outside diameter: 5.9 mm; Thread type (wiring and installation): M12

Price: EUR 75.99