Additional technical information: Design: 12441core number/cross-section: 5à 0.34 mm²drag chain values: 10 Miowire insulation: PP (br, ws, bl, sw, gnge)bending radius (moving): 10à outer-Ãtemperature range (moving): -25...+80 °Ccable identification: 235cable weight [g/m]: 41.80material (conductor): CU-strand, blankresistance (conductor): Max.: 20 ⦠°CÃ-conductor: (Single wire: 20 mm) (conductor): 42à 0.1 mm (strand class 6)AWG: Similar AWG 22material (core insulation): PPcore-à incl. insulation: 1.25 mm ±5%core color/numbering: br, sw, bl, ws, gnge longitudinal-stripedtwisted-strand network: 5 wires around core filler strandedshielding: nochemical resistance: Good oil, petrol and chemical resistance (EN 60811-404)thermal resistance: Flame-resistant according to UL 1581 VW1 / CSA FT1 / IEC 60332-1, IEC 60332-2-2Test voltage: 2500 V ACbending radius (fixed): 5à external Ãnumber of bending cycles (drag chain): Max. 10 Mio (25 °C)Track (drag chain): Max. 10 m (horizontal)Travel speed (drag chain): Max. 3 m/sAcceleration (drag chain): Max.Rated voltage: 10 kV display: 0.8 m/s² LED (green): Power / LED (yellow): (S1) / LED (white): Signal (S2) Slot 1...4Locking of the slots: Screw thread (M12Ã1 mm) recommended tightening torque 0.6 Nm, self-lockingmaterial (locking): Zinc die-cast, nickel-platedcontamination degree: 3; Cable colour: Grey; Cable diameter: 4.8 mm; Cable length: 15.00 m; Coding: A; Connection side A (sensors/actuators): M12 socket, right angle; Connection side B (sensors/actuators): Cable, open end; Cross-section (sensor/actuator wiring): 0.34 mm²; IP rating: IP65, IP66K, IP67 (when connected); Jacket material: PUR; Max. temperature: +80 °C; Min. temperature: -40 °C; Nominal current: 4 A; Nominal voltage: 300 V AC; Outside diameter: 4.8 mm; Thread type (wiring and installation): M12