Micro ATX housing with Tempered Glass and good air flowWith the DeepCool CH370 Micro ATX casing you are not making any compromises when it comes to the aesthetics and the cooling of your gaming PC.The side part is made of tempered glass and enables an excellent view of your installed components. The front consists of a continuous front with air holes for a good fresh air supply.Good airflow thanks to perforated frontThe DeepCool CH370 comes up with good airflow for high-end hardware. There are ventilation holes on the underside and front to ensure enough cool fresh air is held in place. In addition, the lid of the casing is perforated and thus transports the heated air reliably out of the casing. The pre-installed fans thereby provide for a proper passage.In addition, you have the possibility to house a total of eight 120 mm or five 140 mm fans in the CH370 and thus provide continuous effective cooling. The front offers space for three 120 mm or two 140 mm fans, the lid allows two 120 mm or two 140 mm fans, the power supply cover two 120 mm fans and the rear side leaves space for a 120 or 40 mm fan.Many mounting options for radiatorsIf you plan to add water to your system, then the DeepCool CH370 is well positioned despite its size. You can accommodate a 360 mm radiator in the front. In addition, the cover offers place for a 240-mm radiator. In addition, you can also install a 120 mm radiator on the rear side, in case you want to use a small AiO-water cooling for cooling your CPU.Plenty of space for your gaming hardwareTwo 3.5-inch data carriers can be stored in the power supply bay. There are additional two holders at the back of the mainboard tray for two 2.5 inch data carriers.In addition, graphic cards up to a length of 320 mm and CPU-cooler can be installed up to a height of 165 mm.Well-equipped I/O-panelThe I/O panel provides power button, HD audio and microphone connector, and two USB 3.0 Type A ports for faster file transfer.This text is machine translated.